Align T-REX 600 Nitro V2 Limited Edition KX0160NPLB

Brand: Align
Product Code: KX0160NPLB
Availability: In Stock

Align T-REX 600 Nitro V2 Limited Edition KX0160NPLB

Instructions(GP900 Head lock gyro combo):

1.Utilizes MEMS(Micro Electro Mechanical Systems) micro electronic sensors which are small, highly reliable, and highly stable.
2.16bit high processing speed CPU is used for ultra high resolution, resulting in higher rudder precision than previously possible, even on modern high powered helicopters.
3.Supports Spektrum and JR satellites, traditional receiver not needed.
4.Support Futabs S-BUS system.
5.Support both digital and analog servos.
6.Support both wide and narrow band receivers.
7.Integrated RCE-G600 speed governor function, thus GP900 can provide speed governor function without additional electronics.
8.Suitable for all 200 to 700 size glow engine or electric helicopters, with higher vibration resistance than any other systems. Superior performance is achievable even with harder mounting foam tapes.
9.Support parameter setting through PC interface, as well as firmware updates.
10.Anti-torque compensation. Optimal tail locking achievable no matter if gyro is mounted upright or inverted.

Instructions(T-REX 600N V2 Limited Edition):

●T-Rex 600N V2 is equipped with newly developed rotor head system with multiple adjustment holes, allowing pilot to fine tune the machine for high control resolution or high stability based on the needs. In addition, this new T-REX 600N V2 comes with newly styled performance upgrade components for a renewed look.

1.New 600 sized programmable head assembly with 3 sets of positive and negative deltas, numerous Bell and Hiller mixing ratios available, along with various flybar ratio settings.
2.The new head assembly allow pilots to benefit from the head’s higher control resolution as well as stability level, satisfying the need of both highly stable static categories as well as precision aerobatic categories.
3.Dual 3K carbon plate side frame design for ease of maintenance and resistance to torque induced flex.
4.Additional radial bearing is added to the top of the main gear hub to ensure stable rotation, and eliminate jamming of one way bearing.
5.Newly designed unibody stainless steel tail drive gear center mount, for more precise tail drive gear and higher tolerance.
6.New high quality carbon rudder control rod assembly using 5mm carbon rod and metal connectors, resulting in improved rudder control precision.
7.Brand new tail gear box, with aesthetically pleasing material and improved maintenance.
8.Utilizes high efficient tail drive system.
9.High speed rated thrust bearing in tail blade grips.
10.Highly efficient lightened engine cooling fan, reducing engine load and improving cooling efficiency.
11.Large diameter clutch system with unique installation method for good balance, minimal vibration, and effective power transfer.
12.Forward mounted rudder servo to protect it from exhaust contamination.
13.95mm tail blades for sharp rudder response and excellent tail locking ability.
14.Unique H cross section shaped electronic mounting platform for easy electronic mounting and protection.
15.Large capacity 440CC fuel tank for up to 10 minutes of extreme 3D flights.
16.Starting and clutch supporting point utilizes 10mm one way bearing.
17.All up ready to fly dry weight is only 3200g (7lbs).
18.Main fuel tank designed with fuel supply stabilization effect.
19.Light weight highly agile flybar system.
20.Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install/removal.
21.Designed with concepts from large helicopter competitions, for the best static and dynamic flight performance.

Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.

Specification(GP900 Head lock gyro combo):

●Operating Voltage:DC 3.5~8.4V
●Current Consumption:<80mA @ 4.8V
●Angular Detection Speed:600 degrees/sec
●Operating Humidity:-20℃~65℃
●RoHS certification.
●Operating Humidity:0%~95%

Specification(T-REX 600N V2 Limited Edition):

●Main blade length:600mm
●Main rotor diameter:1350mm
●Tail rotor diameter:240mm
●Engine pinion gear:20T
●Autorotation tail drive gear:180T
●Drive gear ratio:8.5:1:4.5(E:M:T)
●Flying weight:Approx. 3200g
●Color carton:72x25.7x12.5cm
●Outer carton:74.5x52.5x39.5cm ,6sets/ctn


●T-REX 600 Nitro V2 kits setX1
●600D PRO Carbon fiber bladeX1
●DS610 Digital servoX3
●DS620 Digital servoX1
●GP900 Head lock gyro comboX1
●2 In 1 voltage regulator comboX1

Radio transmitter and electronic equipment required for assembly:
●Transmitter(7-channel or more, helicopter system)
●Receiver(7-channel or more)
●Standard servoX1
●Align 50 engineX1
●50 MufflerX1
●Pitch gaugeX1
●Super starterX1
●Engine fuelX1
●Fuel pumpX1

New elevator arm set, high rigidity metal main shaft bearing block GP900 Head lock gyro Metal tail control arm with wearproof sleeve
Metal stabilizer belt set Brand new carbon tail control pushrod assembly 2 In 1 voltage regulator combo





Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Related Products (2)